Site Menu

Scientific Research Works

  1. Works of Academician A.Kh.Mirzajanzade.
  2. Monographs of Academician A.Kh.Mirzajanzade.
  3. Rheotechnological know-how in oil extraction.
  4. Determination of initial reserves of oil fields on the basis of kinetic models.
  5. Determination of technological parameters based on inadequate information.
  6. Integral analysis of the state of existing operational wells.
  7. A new mechanism for sand occurrence in wells.
  8. Optimisation of the working regime in gas-lift wells.
  9. Composition for the cementation of the near-filter zone in wells with unperforated formation penetration.
  10. Dynamic well dispersion unit.
  11. Combating water-flow into oil wells.
  12. Method of cleaning hydraulic systems in the oil industry (wells,pipelines) using negative impulse pressure.
  13. A magnetic packer and magnetic plaster.
  14. Increasing the effectiveness of piston-pump production from oil wells using the negative pressure effect.
  15. Method for determining the field type.
  16. Development and application of new methods in hydrocarbon extraction for determining parameters and calculating development indicators in oil, gas and condensate fields.
  17. A set of algorithms and programs for the development of an automated management system for gas-condensate fields.
  18. Method for determining the effective diffusion coefficient of gases.
  19. Equipment for magnetisation of fluids for increasing the productivity of production and injection wells.
  20. Separator for drilled wells.
  21. Relaxing composite compositions.
  22. Systematic analysis in technological processes of hydrocarbon extraction and pipeline transport.
  23. Evaluating the effect of technological indicators associated with the development of offshore hydrocarbon fields and parameters of the external activity on the state of the marine ecological system.
  24. Anti-corrosive paint.
  25. Cleaning oil pipelines and gas pipelines with a visco-elastic separator.
  26. Method of eliminating pulsations in pipelines.
  27. Diagnosing the rheological properties of visco-elastic-plastic fluids as they move through pipes.
  28. Predicting the level of pollution of the marine ecological system: an example from oil-field development in the Caspian Sea.
  29. Modelling the processes of oil expulsion by water for zones of filtration with complex boundary configurations.
  30. Methodology for the experimental determination of the amount of sorption with high gas pressures.
  31. Method for determining typical changes in the course of the sorption process.
  32. Batch of programs for identifying and predicting the condition of oil wells with wax- and scale-formation.
  33. System for controlling distortion of deviated wells in a group.
  34. The "Gorizont" (Horizon) system.
  35. "ASU INS": an automated system for managing distortion in deviated wells.
  36. Discharge inclinometer for measuring distortion parameters in the well bore.
  37. A self-orienting deflector.
  38. Planning the trajectories of deviated wells of planar and spatial type.
  39. Chemical reagents for drilling fluids.
  40. Energy-saving technology in oil extraction.
  41. Elastic elements in packers applied to oil-industry equipment.
  42. New method of production with the minimum specific output of formation gas.
  43. A new pump with metrical thread.
  44. New transmission for a well-pump drive.
  45. New technology for strengthening rod couplings.
  46. New technology for the reciprocal seating of valves in oil-well pumps.
  47. Construction for testing the seal on the casing in well conditions.
  48. Construction of a protector for softening the shocks to the casing about the casing head.
  49. A super-bit rectifier.
  50. Unit for eliminating vibration during flow in pipes.
  51. Investigating the dynamics of a water-separating pipe (marine riser).
  52. Crane for erecting oil drilling equipment, with load capacity of 250 kN.
  53. Systematic analysis aimed at improving the effectiveness of well drilling.
  54. Methodology for calculating the optimum profile for nozzles of a hydraulic monitor bit.
  55. Creation of robust principles for managing technological processes in situations with limited uncertainties.
  56. Increasing the supporting capacities and decreacing the frictional forces between working surfaces by the use of lubricating fluids with visco-elastic properties.
  57. Batch of computer programs "ATAS".
  58. Self-contained mobile unit for processing spent drilling mud and returning the petroleum products to production.
  59. Unit for investigating the heat output coefficient of condensates, petroleum and petroleum products.
  60. Unit for investigating PVT and Ps-Ts relationships of condensates, petroleum and petroleum products.
  61. Unit for investigating the thermal conductivity of condensates, petroleum and petroleum products over a wide range of temperatures and pressures.
  62. Unit for investigating the dynamic viscosity of condensates, petroleum and petroleum products over a wide range of temperatures and pressures.
  63. Removing sand from formation waters from offshore oil wells.
  64. Mobile pumped hydrocyclone unit for washing sand samples from oil wells with closed-circulation drilling fluids.
  65. Unit for removing oil, gas and sand from water.
  66. Conservation oil AZM-1.
  67. Increasing the octane number of gas condensate and distilled benzine.
  68. Method for separating non-ferrous metals from heavy oils in the residue from oil refining by ionic transport.
  69. New technology for removing pigments, surfactants and multifunctional aromatic compounds from waste waters.
  70. Removing SO2 and NO2 from gaseous emissions.
  71. The petroleum-coke briquette.
  72. Purposeful synthesis of functionally-replaced macro-cyclic complexes using the petrochemical products of the Azerbaijan Republic.
  73. Development of rust-preventive oils using the waste materials from the Baku oil and gas refinery "Azerneftyag".
  74. Wax-precipitation inhibitor and flow-stimulator of crude oils.
  75. Fertilizer pellitisation in the presence of drilling waters of petroleum origin.
  76. Electromagnetic filters for cleaning industrial fluids.
  77. Automated electric-drive for a deep-pumping unit based on a single-stage variator.
  78. A microprocessor-controlled information-measurement system for measuring the throughput of natural gas in main gas pipeline.
  79. A code pressure sensor: DDK.
  80. Automated system for the control of the level of petroleum products in tanks, on the basis of an ultrasound echo-locator.
  81. Use of saline waters for the production of steam and hot water in the petroleum industry.
  82. Technology for reagent-free reclamation of a Na-cotionite filter using natural saline water in petroleum extraction installations.
  83. Technology for preparing a supply of water for industrial boilers from biologically purified waste waters from oil-processing plants.
  84. Ion-exchange methods for avoiding scale-formation, and the prospects for using them in the oil industry.
  85. One method for designing an optimum regulator for stabilishing the position of drilling vessels during the activity of chance disturbances.
  86. Naturally occurring membrane-active compounds as effective agents in the synthesis of metallic-complex catalysts.
  87. Machine-tool rocker with pneumo-hydraulic drive.
  88. Drilling rig with hydromechanical drive.
  89. A chain bit for drilling wells.
  90. Thermal demineralisation (freshening) of sea water with preliminary ionisation.